Oops...
Slider with alias sssslide not found.

VACCUM HEAT TREATMENT & SURFACE GAS NITRIDING SERVICES

What SSS can do:

1-Stress relieving,
2-Stress annealing/Relief annealing,
3-Hardening of steels in Vacuum.
4-Tempering in Vacuum and Atmosphere furnaces.
5-Tempering under protective gas atmosphere.
6-Stabilization.
7-Colour check for cracks after heat treatment.
8-Minor corrections to the dies using our tool room in case of any defect noticed.
9-Surface treatment – Gas Nitriding

List of Equipment’s:

1. 800kgs (600x600x900) /12bar/dual speed(1500/3000RPM)/270Hp motor/Computer controlled/Ipsen-Germany furnace.
2. 1800kgs (910x910x1210)/12bar/ALD Dynatech
3. 1500kgs (1000x1000x1300)/Ipsen Nitriding Furnace
4. Special furnace made to specification to meet NADCA and NADCAP criteria. Fasted quenching rates possible for special applications like HSS/PDC/special conditions etc.
5. 3 Tempering furnaces,
6. Quality checking instruments/Hardness testers/colour check.
7. Tool room and Sawing facilities.
8. Back up supply Generators.
9. Technical support from world’s best manufacturers of steel.

We are of the opinion that each die is special and needs treatment specific to its specification and design, we need your understanding to the same. Each grade or specification has different parameters and as such the price of heat treatment for all specifications cannot be the same.

We are of the opinion that each die is special and needs treatment specific to its specification and design, we need your understanding to the same. Each grade or specification has different parameters and as such the price of heat treatment for all specifications cannot be the same.

Our mother company-Goel Steel is authorized stockists of Hitachi Metals ,Japan/Kind&Co-Germany/DEW-Germany/POSCO Specialty Steels-Korea/Vitkovice Heavy Machinery-Czech Republic/Powmex steels-Orissa/Kalyani Carpenter etc.

It would be important to note that all the above manufacturers who excel in their products and countries have extended their full support to our heat treatment facility and with time helping us with the heat treatment of their grades and similar specifications so that you get the best output.
We have worked out few offers which might be of interest to you:

Cold work steels/Plastic mould steels:

1-These steels need continuous fast cooling and high pressure gas quenching followed by 2/3 tempering’s. Please note these steels will tend to shrink or expand based on actual grain alignment.

Hot work Steels:

1-These are the grades most sensitive to good heat treatment and need extra special processing based on the final application of the die.
2-Extrusion material
3-PDC material- we need to additionally stress relieve and follow longer cycles and apply 4 step quenching to get optimum properties at the core. And also apply fast cooling and high pressure quenching (6bar and above)

High Speed steels:

1-These grades are most difficult to heat treat and need very high temperatures for Autenization.
2-Quenching needs to be done at over 8bar and very high fan speeds.
3-We expect heavy wear and tear of the equipment’s when we do HSS.

We also have a proposal with the supply of steel and machining and heat treatment as a package. Please study the same and let us have your:

Goel steel company:

We would be very happy to have a package deal with you for material as well as heat treatment services. The advantages which we see for both of us is as following:

a-The source of material and heat treatment is the same. And since we are the original source of material, we can design and adapt cycle’s specific to that supply. And now the total responsibility is in one hand.
b-All the paper work is completed in just one PO and everything after that is FOC only moving back as job work. We shall arrange to pick and drop as and when the next service is needed.
c-We are also assured of the load back for heat treatment.

Offer: If you are keen on this arrangement, please let us know, we will come and discuss this in detail with you.

We hope you find our offers to your acceptance and hope to start this new relations with you on a healthy note.

To More About Heat Treatment Click Here

Note: Photographs and illustrations are more for clarity and educative purpose of the business we do and not necessarily in original form of our service centers

TOP